Smart-UPS 3000VA LCD RM 2U 120V

SMT3000RM2U
TT$10,432.00
(TT$11,736.00 inc tax)
Currently Unavailable. Call (868) 638-4336 for updates.
30 days
Delivery Options
  • Deliver to your Door! or
    Collect In-Store

Payment options
Our advantages
  • — Warranty Available
  • — Return and exchange
  • — Different payment methods
  • — Best price in T&T

SMT3000RM2U Features

StruxureWare Central compatible: Enables centralized management via StruxureWare Central.
Predicitive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
Sine wave output: Eliminates humming and heat generated when powering tubelights and fans.
LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Serial connectivity: Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meter: Provides actual kilowatt hours of usage for energy conscious users.
Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Disconnected battery notification: Warns when a battery is not available to provide backup power.
Sequenced network shutdown and reboot: Customize network shutdown and reboot sequence of connected servers and UPSs.
Outlet group control: Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Audible alarms: Provides notification of changing utility power and UPS power conditions
Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Network manageable: Provides remote power management of the UPS over the network.
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Serial connectivity: Provides management of the UPS via a serial port.
Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
USB connectivity: Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

Output

Output Power Capacity: 2700 Watts / 2880 VA
Max Configurable Power: 2700 Watts / 2880 VA
Nominal Output Voltage: 120V
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Topology: Line Interactive
Waveform Type: Sine wave
Output Connections:
(6) NEMA 5-15R NEMA 5-15R
(2) NEMA 5-20R NEMA 5-20R

Input

Nominal Input Voltage: 120V
Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections:
NEMA L5-30P NEMA L5-30P
Cord Length: 2.44 meters
Input voltage range for main operations: 82 - 144V
Input voltage adjustable range for mains operation: 75 - 154V

Batteries & Runtime

Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 3 hour(s)
Replacement Battery: RBC43
RBC™ Quantity: 1

Communications & Management

Interface Port(s): USB
Available SmartSlot™ Interface Quantity: 1
Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating : 459 Joules
Brand
APC
UPC Code
0731304279549
Find similar

No reviews found

Possibly you may be interested
  • Bestsellers
  • Most Popular
Fast and high quality delivery

Our company makes delivery all over the country

Quality assurance and service

We offer only those goods, in which quality we are sure

Returns within 30 days

You have 30 days to test your purchase